Programming Menu > Adjustment Area > Presets Configuration - Barco E2 User Manual

6. GUI orientation
6.25 Programming Menu > Adjustment area > Presets configuration
General
The Preset is a register that enables you to store destination setups, "looks", to memory, and recall them back.
Presets configuration menu description
Save to new Preset
Saves the current look into a new Preset. Only Destinations that are active or selected will be saved. For example: There are 3
Destinations. User enables Dest1 and Dest 3 presses "Save to new Preset." Only Dest1 and Dest3 looks will be stored. Dest 2 will
not be part of this Preset
Overwrite Preset
This button allows the override of a selected Preset, if the destination is active. The name of the preset will not be updated.
Delete Preset(s)
By pressing this button, the delete "x" marks will appear next to all presets. Select the presets you like to delete and then press the
red "Delete Selected" button.
Search edit box
Search Presets by name. User types in Presets name and press ENTER, if match, the vertical slider will move to show the Presets
as the top most entry in the list and selects the Preset.
Recall buttons
They are not enabled unless a Preset is selected from the list.
1. Recall Previous button: Recalls the Previous preset. Not active is the Preset1 is selected.
2. Recall Selected button: Recalls the currently selected Preset.
3. Recall Next: Recalls the next preset. Not active the last preset in the list is selected.
130
This menu provides:
• The list of the available Presets.
• A button to create new Preset.
• A button to overwrite the preset data in the selected Preset.
• A button to enter a multiple delete of preset mode.
• A search edit box to search Presets.
• Three buttons to manage preset recall actions.
R5905948 E2 12/12/2014