NetComm NWL-15 User Manual page 13

Perpendicular to the wall
If a large surface area is not available, there is the option of mounting the router perpendicular to the wall. This gives the router a
small wall footprint while remaining securely attached. Use appropriately sized screws in the mounting holes provided on the back
of the unit.
Figure 6 - Wall mount - Perpendicular to the wall
C Section DIN Rail mount
The NWL-15 router easily slides onto a C Section DIN rail so that it is horizontally mounted. The DIN Rail mounting bracket is not
required for C Section DIN rail mounting.
Figure 7 - C Section DIN rail mount
To mount the unit on a C-Section DIN rail, slide it on as illustrated below:
Figure 8 - Mounting the unit on a DIN rail
www.netcommwireless.com NetComm Wireless Light Industrial M2M Router Plus
13