Table of Contents
Advertisement
ITEM
System information
System up time
Board version
Router Serial Number
Software
Model
Firmware
MDN
LAN
IP
MAC Address
Ethernet Port Status
Cellular connection status
Activation Status
Coverage
Signal strength (dBm)
Roaming status
SID / NID
MIP IP Address
MEID
Frequency
Network Registration Status
WWAN Connection Status
Status
IP Type
WWAN IP
DNS server
Connection uptime
Advanced status
Mobile Country Code
Mobile Network Code
Power Input Mode
DC Input Voltage
Cell ID
PN (1x) Index
PN (1x EVDO) Index
Channel (1x)
Channel (1x EVDO)
Signal quality (Ec/Io)
MIP Profile Information
NetComm Wireless Light Industrial M2M Router Plus
22
The current uptime of the router.
The hardware version of the router.
The serial number of the router.
The software version number running on the router.
The type of phone module and the firmware version of the module.
The firmware revision of the phone module.
The Mobile Directory Number of the router on the network.
The IP address and subnet mask of the router.
The MAC address of the router.
Displays the current status of the Ethernet port and its operating speed.
Displays the activation status of the router on the carrier network.
Indicates the type of coverage being received by the router's antennas.
The current signal strength measured in dBm
The roaming status of the router.
The System ID and Network ID of the router.
The Mobile IP Address.
The mobile equipment identifier (MEID) of the router, a unique code for identifying devices on a CDMA network.
The channel that the router is using on the mobile network.
The status of the router's registration for the current network.
The connection status of the active profile.
The type of IP in use. SIP is a Simple IP connection and when moving between cell sectors, the PPP session is torn
down. MIP is a Mobile IP connection which creates an address which is persistent between across cell sectors
allowing the mobile connection to remain connected even when moving between cell sectors.
The IP address assigned by the mobile broadband carrier network.
The primary and secondary DNS servers for the WWAN connection.
The length of time of the current mobile connection session.
The Mobile Country Code (MCC) of the router.
The Mobile Network Code (MNC) of the router.
Displays the router's power source.
Displays the current voltage of the power input source provided via the DC Input jack
A unique code that identifies the base station from within the location area of the current mobile network signal.
The pseudo-random number index used in encrypting the mobile connection for RTT connections.
The pseudo-random number index used in encrypting the mobile connection for EVDO connections.
The 1x (RTT) channel number in use.
The 1x (EVDO) channel number in use.
A measurement of the portion of the received signal that is usable. This is the signal strength minus the signal noise
level.
Displays various details about the profile used to connect to the broadband network.
Table 10 - Status page item details
DEFINITION
www.netcommwireless.com
Advertisement
Table of Contents
