Table of Contents
Advertisement
10.
Under Endpoint B, use the Endpoint name drop down list to select one of the endpoints you created previously. This
endpoint should be the destination of the stream. The screenshot below shows a configuration sending GPS data out of
the built-in serial port. Use the Mode drop down list to select the mode of operation of the endpoint. The mode can be
thought of as a transformation of the data as it arrives at this endpoint.
11.
Click the Save button. The new stream appears in the Data stream list.
.
NetComm Wireless Light Industrial M2M Router Plus
66
Figure 80 - Edit data stream
Figure 81 - Data stream list
www.netcommwireless.com
Advertisement
Table of Contents
