Table of Contents
Advertisement
Sleep settings
Use the Sleep mode drop down list to select a condition under which the router should enter the sleep state.
Sleep by manual trigger only
When this mode is selected, the router will only enter the sleep state when the Trigger sleep mode now button is pressed. The
Trigger sleep mode now button is not available unless Low power functionality has been selected and the setting saved.
Figure 94 - Sleep by manual trigger only
Sleep after specified duration and ignore ignition pin
When this mode is selected, the router goes to sleep after the specified time period regardless of the state of the ignition pin.
Figure 95 - Sleep after specified duration and ignore ignition pin
Enter the time in seconds to wait before entering sleep state in the Always go to sleep this many seconds after booting field. A
setting of 0 means that the router will never enter sleep state.
Sleep triggered by ignition pin status
This mode sets the router to enter sleep state when the signal on the ignition pin reaches the specified value.
Figure 96 - Sleep triggered by ignition pin status
Use the Sleep when ignition pin goes setting to select Low or High. By default, this is set to Low.
Sleep after specified duration or triggered by ignition pin
This option sets the router to go to the sleep state on one of two conditions, depending on which condition is reached first. These
conditions are based on the state of the ignition pin and a timer. For example, based on the configuration in the screenshot below,
the router will go to sleep state when the ignition pin goes low or after 3600 seconds (1 hour), depending on which condition occurs
first.
Figure 97 - Sleep after specified duration or triggered by ignition pin
www.netcommwireless.com
NetComm Wireless Light Industrial M2M Router Plus
83
Advertisement
Table of Contents
