Table of Contents
Advertisement
DHCP
The DHCP page is used to adjust the settings used by the router's built in DHPC Server which assigns IP addresses to locally
connected devices.
DHCP relay configuration
In advanced networks configurations where the NWL-15 router should not be responsible for DHCP assignment, but instead an
existing DHCP server is located on the Wireless WAN connection, the clients behind the NWL-15 router are able to communicate
with the DHCP server when DHCP relay is enabled. This enables the NWL-15 router to accept client broadcast messages and to
forward them onto another subnet.
To configure the router to act as a DHCP relay agent click the DHCP Relay toggle key to turn it ON and enter the DHCP server
address into the DHCP Server Address field. DHCP relay is disabled by default.
NetComm Wireless Light Industrial M2M Router Plus
34
Figure 36 - DHCP Configuration
Figure 37 – DHCP relay configuration
www.netcommwireless.com
Advertisement
Table of Contents
