Download Print this page

Korg D1600 Owner's Manual: Important Safety Instructions

Korg digital recording studio owner's manual.
Hide thumbs

Advertisement

INSTRUCTIONS PERTAINING TO
A RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING
—When using electric products, basic
precautions should always be followed, including the
following:
1) Read all the instructions before using the product.
2) Do not use this product near water—for example, near a
bathtub, washbowl, kitchen sink, in a wet basement, or near
a swimming pool, or the like.
3) This product should be used only with a cart or stand that is
recommended by the manufacturer.
4) This product, either alone or in combination with an amplifier
and headphones or speakers, may be capable of producing
sound levels that could cause permanent hearing loss. Do
not operate for a long period of time at a high volume level or
at a level that is uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult an audiologist.
5) The product should be located so that its location or position
does not interfere with its proper ventilation.
6) The product should be located away from heat sources such
as radiators, heat registers, or other products that produce
heat.
7) The product should be connected to a power supply only of
the type described in the operating instructions or as marked
on the product.
8) The power-supply cord of the product should be unplugged
from the outlet when left unused for a long period of time.
9) Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
10) The product should be serviced by qualified service person-
nel when:
a) The power-supply cord or the plug has been damaged; or
b) Objects have fallen, or liquid has been spilled onto the
product; or
c) The product has been exposed to rain; or
d) The product does not appear to operate normally or
exhibits a marked change in performance; or
e) The product has been dropped, or the enclosure
damaged.
11) Do not attempt to service the product beyond that described
in the user-maintenance instructions. All other servicing
should be referred to qualified service personnel.
SAVE THESE INSTRUCTIONS
i
The lightning flash with arrowhead symbol within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence
of important operating and maintenance (servic-
ing) instructions in the literature accompanying
the product.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break-
down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appro-
priate outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances.
DANGER
—Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check with a qual-
ified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug pro-
vided with the product—if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
THE FCC REGULATION WARNING
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Unauthorized changes or modification to this system can void
the user's authority to operate this equipment.
CE mark for European Harmonized Standards
CE mark which is attached to our company's products of AC
mains operated apparatus until December 31, 1996 means it
conforms to EMC Directive (89/336/EEC) and CE mark Direc-
tive (93/68/EEC).
And, CE mark which is attached after January 1, 1997 means
it conforms to EMC Directive (89/336/EEC), CE mark Directive
(93/68/EEC) and Low Voltage Directive (73/23/EEC).
Also, CE mark which is attached to our company's products of
Battery operated apparatus means it conforms to EMC Direc-
tive (89/336/EEC) and CE mark Directive (93/68/EEC).
IMPORTANT NOTICE FOR THE UNITED KINGDOM
WARNING—THIS APPARATUS MUST BE EARTHED
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug,proceed as follows:
• the wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the earth symbol
green and yellow.
• the wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
• the wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
(for U.S.A.)
, or coloured green or

Advertisement

   Also See for Korg D1600

   Related Manuals for Korg D1600

Comments to this Manuals

Symbols: 0
Latest comments: