Table of Contents
Advertisement
26
MW810 Mobile Workstation Vehicle Installation Manual
Keyboard
The keyboard tray may be placed anywhere in the vehicle. Please ensure that all safety
guidelines and air-bag deployment requirements are met.
When a mounting tray is used, the keyboard is provided with a quick release holder to allow
operation of the keyboard when out of the holder. Care must be used to ensure ample space
for extracting and reinserting the keyboard into the holder. Ensure that the cable is routed in a
manner that allows the operator to remove the keyboard from the mounting tray and operate
the keyboard on the lap.
The all Displays have a standard Universal Serial Bus (USB) type A receptacle to which is
generally used for QWERTY style keyboard. The maximum current load from USB 2.0 port
is 500mA. When a keyboard is used, the keyboard cable connector must be secured to the
display by thumb screws.
Use the rubber plug provided with this product to seal the port when not in use.
All auxiliary devices connected to the display (keyboard or any USB peripherals) must be anchored
!
or secured to the vehicle. Pull off the road and park before using the keyboard, if driving conditions
or regulations so require.
Warning
Failure to comply with this warning may result in body injury or even death in case of vehicle
impact (see example in Figure 22)
Figure 22
Keyboard Secured in Door Compartment
Securing Straps
Advertisement
Table of Contents
