Display Connection - Motorola MW810 Installation Manual

Mobile workstation series
Hide thumbs Also See for MW810:
Table of Contents

Advertisement

38
MW810 Mobile Workstation Vehicle Installation Manual

Display Connection

The standard RGB interface connection is used for the primary display unit and DVI
interface for the secondary display (option VA00385AA).
The CPU Box graphics controller support resolutions up to 1280 x 1024 and the
simultaneous operation of two monitors, the analog RGB (DISPLAY1 connection) and
digital DVI (DISPLAY2 connection).
Use only Motorola original integrated molded cables for connection to the MW810 Mobile
Workstation display or to 3rd-party LCD, CRT or Flat Screen displays.
The MW810 Mobile Workstation displays have available USB 2.0 ports supporting transfer
rates up to 480 MB/s. When the CPU is connected to the old MW800 display, only USB 1.1
performance can be provided.
Table 6 details the pin layout of the
Table 6
DISPLAY 1 Connection - Pin Layout
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
The CPU Box graphic controller supports resolutions up to 1280x1024.
When using MW810 display, XGA resolution (1024 x 768) is
recommended.
Note
DISPLAY 1
Signal
Red
Green
Blue
VSYNC
USB_5+
USB_5-
LINE_OUT_L
LINE_OUT_R
MIC2+
5V_SUS
PRIM_DISP_ON_BTN#
V5_SUS
DISPLAY_LID#
DDCCLK_DATA
DDCCLK_CRT
N.C
N.C
GND
connection

Advertisement

Table of Contents
loading

This manual is also suitable for:

F5208

Table of Contents