Table of Contents
Advertisement
In-dash DIN Mount
The In-dash DIN Mount is a rectangular (2" high x 7" wide) mount that can be adapted to
most vehicles produced today that contain a standard 'Single DIN' opening.
During installation, the display can be adjusted to provide optimal accessibility using the
following pivot and mounting adjustments (see Figure 13):
• Swivel: up to 13°
• Tilt: up to 35°
• Vertical: up to 70 mm
• Horizontal: up to 30 mm
• Extension out: up to 48 mm
Figure 13
8.4" Display - In-dash DIN Mount
.
The In-dash DIN Mount has no parts that can be adjusted by the user.
Mount readjustment can only be performed by service technicians.
Note
Swivel Adjustment Screws
13 ° Swivel
In/Out
48 mm
Up/Down
70 mm
Vertical
Mounting
Holes
Installation
Four M4, 10 Screws
Horizontal
Adjustment Holes
°
35
Tilt
Left/Right 30 mm
Tilt Adjustment
Screws
17
Advertisement
Table of Contents
