Ceramic Panels Installation - Valor LEGEND G4 780IN (NG) Installation And Owner's Manual

The following guidelines apply for all brick liners.
1. Remove the rear log support (3 screws).
2. Remove the front brick support.
3. Inside the fi rebox, on the top of each side, release
the screw of the side brick anchors (one per side)
just enough to allow them to rotate.
4. Place the rear panel against the back of the fi rebox,
on the ledge at bottom.

Ceramic Panels Installation

5. Rotate the anchor up and out of the way and slide
6. Rotate the anchor up and out of the way and slide
7. Tighten the side brick anchors on each side of the
8. Install the top brick supporting it with the back and
the left hand side panel against the fi rebox side.
Rotate the anchor back down to hold the panel.
the right hand side panel against the fi rebox side.
Rotate the anchor back down to hold the panel.
fi rebox.
side panels.
INSTALLATION
17