Changing Camera Settings - CipherLab 9400 Reference Manual

2) Hold still and take aim at the object you want to take a picture.
3) Tap to take pictures. Each will be automatically saved under the directory
"\DiskOnChip" in the format of MMDD_xxxx.jpg or .bmp ("xxxx" stands for 4-digit
serial starting from "0001"). For example, 5 JPEG pictures taken on July 3rd will be
stored as "0703_0001" ~ "0703_0005" (.jpg).
4) Tap to exit the Camera Preview Mode.

4.9.3 CHANGING CAMERA SETTINGS

Before entering the Camera Preview Mode, tap
necessary.
Camera Settings
Resolution
Flash Light
Color Effects
Image Format
Options
By default, 800 by 600 pixels resolution is in use.
1600 by 1200 pixels resolution is supported.
By default, the flash light is turned on.
If you want to save battery power or ambient light is enough, you
may turn it off.
By default, no color effect is applied.
Monochrome, Sepia, Negative, Solarize (with unmodified UV), and
Solarize 2 (with UV) are supported. Applying any color effect will
take approximately 8 seconds to configure the camera.
By default, the captured image will be saved in JPEG format.
Bitmap format is supported.
Chapter 4 Using Applications
to configure camera settings if
99