Explanation Of The Values Of The Main Board Settings - GRAPHTEC FC7000-75 Service Manual

7.3.4 Explanation of the Values of the Main Board Settings

(Default factory settings)
The default factory settings are recorded in the location shown below.
The contents of an example record are shown below.
25 47
X= 0 X= 80 X= -
Y= 4 Y= 50 Y= -
Explanation of the values
10 g 40g
Distance adjustment values
X
Y
You can input the same values when you have replaced the main board without making any adjustments.
If you have changed any values by making adjustments, record those values for the next maintenance check.
FC7000-UM-251-9370
100 228 346
Pen force values
120 g 300 g
Gain adjustment values Auto registration mark position adjustment values
X
Y
The default factory settings
are recorded here.
450 g (400g)
7-11
7. ADJUSTMENT
X
Y