GRAPHTEC FC7000-75 Service Manual page 14

Rear View
Media set lever: .............. Used to raise or lower the pinch rollers during the loading or unloading of media.
Pinch roller hold-down force switching lever:
AC line inlet: ................... Inlet where the power cord is connected.
Media stocker: ................ Used to carry roll media and ensure its proper rotation.
Stock rollers: ................... A media roll is placed on these rollers.
Media lock: ..................... Used to prevent the stock rollers from rotating when the media roll has been placed
USB interface connector:
Serial interface connector:
FC7000-UM-251-9370
Pinch roller hold-down force switching lever
Media set lever
USB interface connector
Media lock
Serial interface connector
Used to switch between the two pinch roller forces (strong and weak).
on top of them. The media lock ensures that the media is pulled straight out from
the roll.
Used to connect the plotter to the computer with a USB interface cable.
Used to connect the plotter to the computer with an RS-232 serial interface cable.
2. PARTS NAMES and FUNCTIONS
AC line inlet
Media stocker
Stock rollers
2-2