Attaching The Fc7000 Basket (Option) - GRAPHTEC FC7000-75 Service Manual

2.3 Attaching the FC7000 Basket (Option)

The FC7000 Basket box contains one basket holder assembly (one front basket tube and one rear basket
tube inserted into two tube brackets), one cloth basket, and a screw/wrench set.
(1) Attach one of the two tube brackets on the basket holder assembly to the left side of the stand with two
socket head cap screws, using the Allen wrench.
Repeat this step with the other side.
(2) Drape the middle section of the cloth basket over the stand's center bar, and then snap the middle
section of the cloth basket around the center bar. Snap the front edge of the cloth basket around the
front basket tube, and then snap the rear edge of the cloth basket around the rear basket tube.
Cloth basket
FC7000-UM-251-9370
Socket head
cap screw
Basket holder assembly
Holder snap
Cloth basket
2-8
2. PARTS NAMES and FUNCTIONS
Socket head
cap screw
Stand
Side view
Front
Center bar
Separate into front and rear baskets,
with the center bar as the center point