GRAPHTEC FC7000-75 Service Manual page 17

(1) Assemble the left and right stand sides. Fasten a base assembly to each of the stand side bars with four
socket head cap screws, using the Allen wrench.
(2) Loosely fasten the center bar to the left and right stand sides with four socket head cap screws (two on
each side), using the Allen wrench.
(3) Attach a media stocker bracket to each of the left and right stand sides with two socket head cap screws,
using the Allen wrench. Mount the media stocker brackets so that each one protrudes directly above the
longer of the two base assembly lengths.
FC7000-UM-251-9370
Stand side bar
• Assemble the stand so that the front and rear lengths of the base assembly are
the same for both the left and right stand sides.
Socket head
cap screws
Stand sides
Media stocker bracket
Stand sides
2. PARTS NAMES and FUNCTIONS
Socket head
cap screws
Base assembly
Stand side bar
Center bar
Socket head
cap screws
Socket head cap screws
Media stocker bracket
Base assembly
2-5