GRAPHTEC FC7000-75 Service Manual page 10

CPU
Configuration
Drive
Max. cutting area
(expanded mode)
Guaranteed precision cutting area
*1
Mountable media width
Max. cutting speed (Axial)
Specifiable speeds
Cutting pressure
Min. character size
Mechanical resolution
Programmable resolution
Repeatable accuracy
*1
Number of cutters/pens
Pen types
Pouncing tool type
Compatible media
Compatible paper for pouncing
Standard interfaces
Buffer memory
Resident command sets
LCD Panel
Power supply
Power consumption
Operating environment
Guaranteed accuracy environment Temperature: +16 ˚C to +32 ˚C
External dimensions without stand 1110 x 402 x
Weight
*1 When the optional basket and Graphtec-specified media are used.
*2 HP-GL is a registered trademark of Hewlett-Packard Company.
*3 The 2-pen unit is a factory-installed option. It cannot be retrofitted.
*4 The PPA32-TP12 pouncing pen cannot be used.
*5 The CB15UA cutter blade and a reinforced backing sheet must be used when cutting high-intensity reflective film.
FC7000-UM-251-9370
FC7000MK2-60 FC7000MK2-75
32-bit
Grit-rolling plotter
Digital servo
50m x 610 mm 50m x 762 mm 50m x 1067
15m x 590 mm 15m x 742 mm 15m x 1047
Max. 866 mm, Max. 920 mm,
Min. 50 mm Min. 50 mm
148.5cm/sec (45 ips)
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90, 100, 105 cm/sec
48 steps, 0.196-5.88N (20-600gf)
3mm (0.125 in.) alphanumeric Helvetica med. Font
0.005mm
GP-GL: 0.01/0.05/0.025/0.01mm, HP-GL: 0.025mm
Max. 0.1 mm/2-m unit (excluding media shrinkage)
1 (2 for the optional 2-pen models)
Water-based fiber-tip, oil-based ballpoint and disposable ink pens
Pouncing tool: PPA33-TP12, 1.2-mm pin diameter)
Mono-vinyl chloride media, fluorescent media, and media for illuminated displays,
high reflective media, up to 0.25mm thick, Sandblast rubber up to 1mm thick
Regular paper from 0.06 to 0.13 mm thick
RS-232C/USB (Auto switching)
2 MB
GP-GL/HP-GL(Control panel switching)
20x4 - Supports 7 languages: with amber backlight
100-240VAC/50-60 Hz (Auto switching)
160VA max.
Temperature: +10˚C to +35˚C
Humidity: 35% to 75% (non-condensing)
Humidity: 35% to 70%(non-condensing)
1260 x 402 x
477mm 477mm
22 kg 29 kg
1-2
FC7000MK2-100 FC7000MK2-130 FC7000MK2-160
50m x 1372
mm mm
15m x 1352
mm mm
Max. 1224 mm, Max. 1529 mm,
Min. 50 mm Min. 50 mm
*2
*3
*4
1560 x1210 x 1860 x 1210 x
715mm 715mm
43 kg 51 kg
(including stand) (including stand)
1. INTRODUCTION
50m x 1626
mm
15m x 1606
mm
Max. 1834 mm,
Min. 50 mm
*5
2120 x 1210 x
715mm
59 kg
(including stand)