How To Replace The Center Cover - GRAPHTEC FC7000-75 Service Manual

6.1.3 How to Replace the Center Cover

How to detach the center cover
(1) Detach the right side cover (see Subsection 6.1.1).
M3L6 binding head screw
M3L6 binding head screw
(2) Disconnect the cables from connector J2 and J3 on the main board.
(3) Remove the four M3L6 binding head screws from the center cover assembly.
(4) Detach the center cover assembly.
How to reinstall the center cover assembly
(1) Reattach the center cover assembly in the reverse order in which it was detached.
FC7000-UM-251-9370
M3L6 binding head screw
Disconnect the cables
from connector J2 and
J3 on the main board.
6. DISASSEMBLY AND REASSEMBLY
Center cover assembly
M4L6 binding head screw
Right side cover
6-3