GRAPHTEC FC7000-75 Service Manual page 3

No. Date issued
1 05.06.21
2 05.08.29 The cutting mats are added for the recommended parts list.
3 05.08.29 Part number for the right and left media stocker bracket corrected.
4 05.08.31 List of item requiring readjustment corrected.
5 05.11.24 Part number for the bracket bottom corrected.
6 05.11.24 Part number for the media sensor bracket corrected.
7 05.11.24 Part number for the labels added.
8 05.12.13 Part number for the model labels corrected.
9 05.12.13 Part number for the X motor belt corrected.
10 05.12.13 Part number for the pinch roller corrected.
11 06.02.26 The distance adjustment pattern size changed.
12 06.07.04 Part number for the Y drive pulley 38 assy corrected.
13 06.07.04 Part number for the idler pulley assy corrected.
14 06.08.08 Item number for the pinch roller sensor dog corrected.
15 06.10.19 Part number for the idler pulley assy corrected.
16 07.07.11 Information of the FC7000MK added.
17 07.07.13 Information of the new main board for FC7000 added.
18 07.10.19 Information of the sensor dog position added.
19 07.10.19 Correction of procedure.
20 07.10.19 Part number for the X motor corrected.
21 07.10.19 Part number for the Y motor corrected.
22 07.10.19 Part number for the Y drive pulley corrected.
FC7000-UM-251-9370
HISTORY OF REVISIONS
Description of revision
First Printing
4-1,4-2,10-7,10-9
4-1,4-2,10-7,10-9
I
Page Edition
All 01
4-1 02
10-13 02
7-1 02
10-3 03
10-7 03
10-12 03
10-12 04
10-7 04
10-10 04
7-18 05
10-9 06
10-9 06
10-10 07
10-7 08
All 09
4-1,7-1,7-31 09
6-28 10
7-14 10
10
10
10-9 10