Multi-Feeder Paper Size Setting - Canon GP160DF Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM
D.

Multi-feeder paper size setting

The multi-feeder paper size setting differs, depending on how the multi-feeder is
used.
a) When using the multi-feeder with a fixed paper size.
b) When resetting the size when replenishing the multi-feeders paper.
For a), designate the paper size by:
Registration/Setting key > 01 Data registration > 05 Printer settings > 06 Name stack
size "ON".
If 06 Name stack size "OFF" is selected, the size needs to be set as for the above b).
In this case, set the paper size when setting paper in the multi-feeder.
In both cases a) and b), if the paper size setting and the size of the paper in the
multi-feeder are not the same, the "PAPER SIZE SETTING IS WRONG" message will
be displayed on the control panel.
In addition, the above methods a) and b) are the only 2 methods available when
printing fax reception data on multi-feeder pick-up paper.
7-10
COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)