Image Processor Pcb - Canon GP160DF Service Manual

CHAPTER 9 EXTERNAL/AUXILIARY MECHANISM
D.

Image processor PCB

1. Removing the ROM DIMM
1) Remove the installation 4 screws,
and remove the main unit's back
cover.
2) Spread the upper and lower tabs [2]
of the ROM DIMM [1], and remove
the ROM DIMM.
:
Caution
When removing the ROM DIMM, if it is
pressed down too strongly, it may
cause damage to the mount, so per-
form this operation carefully.
2. Removing the image processor
PCB
1) Remove the 4 installation screws and
remove the main unit's back cover.
2) Remove the 7 connectors which are
attached to the image processor PCB
and remove the 2 flat cables.
3) Remove the 4 installation screws [1],
and remove the image processor
PCB [2].
9-26
COPYRIGHT © 1999 CANON INC.
Figure 9-518
Figure 9-519
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
[2]
[1]
[2]
[1]