Canon GP160DF Service Manual page 542

CHAPTER 4 SERVICE MODE
#1 SSSW-SW26: Transmission function settings
SW Bit
No. No.
0 Forced direct transmission function
1 Reserved
2 Reserved
3 Reserved
26 4 Reserved
5 Reserved
Destination at the time broadcast transmission is
6
interrupted
7 Error report for time of transmission interruption Do not output
[Bit 0]
Selects whether or not to set the forced direct transmission function.
Set: All transmissions other than broadcast transmissions are sent directly.
[Bit 6]
Selects whether or not to interrupt communications to all destinations when broadcast
transmission is interrupted.
[Bit 7]
Selects whether or not to output an error report when the stop key is pressed to inter-
rupt transmission.
4-40
Function
Table 4-16
Bit setting
1
Set Do not set
One destination All destinations
Output
0