Multi-Feeder Assembly - Canon GP160DF Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM
B.

Multi-feeder assembly

1. To remove the multi-feeder pick-
up roller
1) Remove the printer unit from the
main unit ( refer to 9-19).
2) While pressing the tab, remove the
release lever [1]. Then remove the 3
installation screws [2] and remove
the drive unit cover [3].
3) Remove the 3 installation screws [4],
then remove the right cover [5].
:
Caution
Take care not to damage the multi-
feeder paper sensor lever.
7-30
COPYRIGHT © 1999 CANON INC.
Figure 7-714
[4]
Figure 7-715
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[3]
[1]
[2]
[5]