CHAPTER 10 CASSETTE FEEDER
A.
Removing the feeder
motor
1) Remove the two screws, and take off
the cassette feeder's rear cover.
2) Remove the relay connector [1], and
remove the cord guide [2] from the
cable in the two places indicated on
the figure.
3) Remove the two screws [3], and
remove the feeder motor [4].
B.
Removing the pick-up/
feeder/separation motor
It is easier and more reliable to
remove the cassette feeder from the
main unit prior to attempting to remove
the pick-up/ feeder/separation motor.
1) Grip the pick-up tab [1], and remove
it from the pick-up drive shaft [2].
10-12
COPYRIGHT © 1999 CANON INC.
[2]
[4]
[2]
[3]
[3]
Figure 10-701
[1]
Figure 10-702
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[2]
Lift up to remove