Canon GP160DF Service Manual page 541

#1 SSSW-SW25: Report display function settings
SW Bit
No. No.
Transmission telephone numbers displayed in
0
the report
1 Other party abbreviations displayed in the report Leave
2 Reserved
25 3 Message language switch
4 Reserved
5 Reserved
6 Reserved
7 Reserved
[Bit 0]
Selects transmitting telephone numbers displayed in the report after transmission has
ended.
Calling party's number:
Destination party's telephone number: displays the telephone number (CSI signal data)
:
MEMO
Even if calling party's number is selected, when the call is not dialed by one-touch
dialling or speed dialling, the telephone number (CSI data signal) sent by the other
party's machine is displayed in the report.
[Bit 1]
Selects other party's abbreviation displayed in the report after transmission has ended.
Registration abbreviation:
Other party's machine's abbreviation: displays the abbreviation (NSF signal data) sent
:
MEMO
Even if "Registration abbreviation" is selected, when the other party's abbreviation is
not entered in the Calling side's 1-touch or coded speed dialling, the abbreviation
(NSF signal data) sent from the other party's machine is displayed in the report.
[Bit 3]
When "display" is selected, "06 message language" is displayed in the user mode's sys-
tem settings.
Function
Table 4-15
displays the Calling side's telephone number in
the report.
sent from the destination party's machine in the
report.
displays the other party's abbreviation entered in 1-
touch dialling and coded speed dialling in the report.
from the other party's machine in the report.
CHAPTER 4 SERVICE MODE
Bit setting
1
Other party's Calling party's
number number
Clear
Display Do not display
0
4-39