Canon GP160DF Service Manual page 127

Hide thumbs Also See for GP160DF:
Table of Contents

Advertisement

2.
Pick-up delay jam (in the case of multi-feeder pick-up)
The pick-up from the multi-feeder is monitored by the registration sensor (PS302)
The timer count begins after the multi-feeder pick-up solenoid (SL302) has come
ON, or, in the case he second sheet during multiple sheet continuous pick-up, after the
paper sheet previously picked up has passed through the registration sensor. If paper
has not arrived at the registration sensor approx.1.5 seconds from the count beginning,
a retry pick-up takes place.
After the retry pick-up solenoid has turned ON, the timer count begins again, if paper
has not arrived at the registration sensor within approx.1.5 seconds, the retry pick-up
takes place once again. If paper has not arrived at the registration sensor within
approx.1.5 seconds after the second retry pick-up timer count begins, it is judged that a
delay jam has occurred.
Start signal
Multi-feeder pick-up
solenoid (SL302)
Registration sensor
jam check
Registration sensor
(PS302)
Main motor
(M601)
Multi-feeder pick-up
solenoid (SL302)
Registration sensor
jam check
Registration sensor
(PS302)
Main motor
(M601)
COPYRIGHT © 1999 CANON INC.
1.5 sec.
Normal
Jam detection sequence for 1 sheet pick-up
Figure 7-606
Start signal
First sheet
Jam detection sequence for multiple sheet pick-up
Figure 7-607
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
Multi-feeder pick-up
solenoid (SL302)
Registration sensor
jam check
Registration sensor
(PS302)
Main motor
(M601)
Retry
pick-up
Second
Third
Retry
sheet
sheet
pick-up
1.5 sec.
1.5 sec.1.5 sec.
1.5 sec.
Retry
Start
Retry
pickup
signal
pickup
1.5 sec.
1.5 sec.
1.5 sec.
Abnormal
Abnormal
7-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp160Gp160f

Table of Contents