Canon GP160DF Service Manual page 535

#1 SSSW-SW07: closed connection function setting
SW Bit
No. No.
0 Setting prohibited
1 Setting prohibited
2 Setting prohibited
3 Setting prohibited
07
4 Setting prohibited
5 Setting prohibited
6 Closed network connection reception
7 Closed network connection transmission
The closed network connection function is a function for communication only with
specified faxes. This function is only available for specified faxes with machines that
have the closed network connection function.
[Bit 6]
Selects whether or not to use closed network connection reception function reception.
When you wish to receive a fax only from a specified machine, select "yes" and set the
same ID as the transmitting machine. The ID setting is set by the SW08 bit switch 8.
[Bit 7]
Selects whether or not to use closed network connection transmission function trans-
mission.
When you wish to send a fax only to a specified machine, select "yes" and set the same
ID as the reception machine.
The ID setting is set by the SW08 bit switch 8.
If the ID does not match that of the reception machine, an error code (#039) will be dis-
played.
Function
Table 4-9
CHAPTER 4 SERVICE MODE
Bit setting
1 0
Yes No
Yes No
4-33