Advertisement
AG-08
High-Capacity Spray Gun
Betriebsanleitung • Owner's Manual
Manuel d'utilisateur • Manuale dell'utente
Manual de usuario • Gebruikshandleiding
Ejermanual • Användarmanual
Model Numbers:
G-THD, 1/4" ...........................................................0296362
G-THD, 1/4", no tip ................................................0296386
G-THD, 1/4", no tip, 2 Fgr .....................................0296467
F-THD, 1/4" ............................................................0296393
F-THD, 1/4", no tip ................................................0296388
F-THD, 1/4", no tip, 2 Fgr .....................................0296465
F-THD, 1/4", striping, 2 Fgr ..................................0296392
Deutsch .........................................................................p. 2
English .........................................................................p. 10
Français .......................................................................p. 18
Italiano .........................................................................p. 26
Español........................................................................p. 34
Nederlands ..................................................................b. 42
Dansk ...........................................................................s. 50
Svenska .......................................................................s. 58
GB
D
F
E
I
•
Form No. 0296396H
0311
NL
DK
S
Advertisement
Table of Contents
Related Manuals for WAGNER AG-08
Summary of Contents for WAGNER AG-08
- Page 1 AG-08 High-Capacity Spray Gun Betriebsanleitung • Owner’s Manual Manuel d’utilisateur • Manuale dell’utente Manual de usuario • Gebruikshandleiding Ejermanual • Användarmanual Model Numbers: G-THD, 1/4” ............0296362 G-THD, 1/4”, no tip ..........0296386 G-THD, 1/4”, no tip, 2 Fgr ........0296467 F-THD, 1/4” ............0296393 F-THD, 1/4”, no tip ..........0296388 F-THD, 1/4”, no tip, 2 Fgr ........0296465 F-THD, 1/4”, striping, 2 Fgr ........0296392 Deutsch .................p. 2 English .................p. 10 Français ...............p. 18 Italiano .................p. 26 Español................p. 34 Nederlands ..............b. 42 Dansk ................s. 50 Svenska ...............s. 58...
-
Page 2: Safety Precautions
Protective clothing, gloves, eyewear, and, in certain cases, protective skin cream are necessary to protect the skin. Follow the coating material and solvent manufacturer’s warnings and instructions. Extraction equipment should be installed by the user in accordance with local regulations. AG-08... -
Page 3: Specifications
Operating temperature range ..............5ºC to 40ºC (40ºF to 104ºF) Maximum material temperature ..............43ºC (109ºF) Maximum sound output................81 dB(A)* Weight ......................450 g (1 lb.) Measurement location: 0.5 m away from the coating surface, 0.5 m behind the spray gun, spray pressure 12 MPa, tip size 0.021 AG-08... - Page 4 Press in for final adjustment. Insert the tip into the slot on the tip guard. Thread the tip guard onto the gun. Position the tip guard in the desired spraying position, then tighten securely. Tip Seal Seal The arrow on the tip handle should be pointing in the forward direction for spraying. AG-08...
-
Page 5: Operation
The first digit multiplied by two represents the size of the spray pattern when spraying 12” away from the work surface: 5 x 2 = 10” spray pattern The second two digits represent the diameter of the orifice on the tip: 17 = .017” orifice Worn spray tips will adversely affect the spray pattern and result in reduced production, poor finish, and wasted material. Replace worn tips immediately. AG-08... -
Page 6: Maintenance
Soak the removed parts in the appropriate solvent and wipe clean. Inspect the parts for wear or damage and use new parts during reassembly of the gun, when necessary. Lubricate all packings and moving parts before reassembly with a lithium-based grease. Install the seal assembly into the front of the gun head. AG-08... -
Page 7: Parts List
0034383 Synthetic resin, Extrafine enamels, clean varnishes, stains azures 0043235 Base coat enamels, Fine yellow primer enamels, fillers, marking paints, textured enamels 0034377 Emulsions, Medium white latex paints, acrylic paints 0089323 Filler paints, Coarse green large area surfaces Parts list, page 66 AG-08... -
Page 8: Important Notes On Product Liability
(employer´s liability insurance association and factory inspectorate division). Only the usage of original WAGNER accessories and spare parts guarantees that all safety regulations are observed. - Page 9 Wagner parts. for products to which modifications or additions have been carried out.
-
Page 10: Liste De Pièces
Trade Tip 2 LineFinish Trade Tip 2 LineFinish 0556041 Düsenschutz, 7/8” Tip guard, 7/8” Protection de buse, 7/8” 0556042 Düsenschutz, 11/16” Tip guard, 11/16” Protection de buse, 11/16” 0297007 Düsendichtung Tip seal Joint de buse 9910201 Sicherungsmutter Lock nut Écrou de blocage AG-08... - Page 11 (incluis eléments 5, 6, et 11) Spritzpistolenreparatursatz, Gun repair kit, 11/16” Kit de réparation du 0556039 11/16” diffuser (mit Teil 5, diffuser (includes items pistolet, 11/16” diffuseur 6 und 11) 5, 6, and 11) (incluis eléments 5, 6, et 11) AG-08...
-
Page 12: Servicenetz In Deutschland
Telefax 0 21 02 / 3 43 95 J. Wagner GmbH www.grimmer-sc.de Service-Stützpunkt Olbernhauer Straße 11 09526 Heidersdorf Wagner Kontaktnetz Deutschland, im Internet zu Tel. 03 73 61 / 1 57 07 finden unter: www.wagner-group.com/profi Telefax 03 73 61 / 1 57 08 Europa-Servicenetz J. Wagner GmbH Wagner Spraytech Wagner Colora S.R.L.