Changing The Aircoat Nozzle - WAGNER AC 4600 Professional Operating Manual

EDITION 06/2012
OPERATING MANUAL
5.4.3

CHANGING THE AIRCOAT NOZZLE

Defective AirCoat nozzle!
Insufficient paint application quality
Do not use sharp-edged objects to treat hard metal on the AirCoat nozzle.
SIHI_0020_GB
1. Relieve spray gun and unit pressure.
2. Secure gun with trigger safety catch.
3. Screw off the union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of the air cap (B) by hand and brush with cleaning solvent
until all remaining paint has been dissolved.
6. Mounting:
Place AirCoat nozzle (C) in nozzle seal (D).
7. Fit the aircap (B) over the nozzle (C), ensuring that the location fl ats (X) are in line.
8. Fit the union nut with nozzle guard (A) and tighten by hand.
PART NO. DOC394871
CAUTION
C
B
A
AC 4600 Pro
D
B_02701
x
B_02261
22