Scanner Lamp Power Save Mode; Setting The Time Out Option - Dell 2335dn - Multifunction Monochrome Laser Printer B/W User Manual

2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
5. Enter Start Date and then press Select (
6. Enter End Date and then press Select (
7. Press Cancel (

Scanner Lamp Power Save Mode

The scan lamp under the document glass automatically turns
off when it is not in actual use after a preset period to reduce
power consumption and extend the lamp life. The lamp
automatically turns on and the warm-up cycle begins
whenever any key is pressed or the DADF cover is opened or
a document is detected in the DADF.
You can set the duration for which the scan lamp waits after a
scan job is completed before it switches to the Power Save
mode.
1. Press Scroll ( or
2. Press Scroll ( or
3. Press Scroll ( or
4. Press Scroll ( or
The available time options are 30, 60, and 120 (minutes).
5. Press Select (
6. Press Cancel (

Setting the Time Out Option

You can set the time the printer waits before it restores the
default copy or fax settings, if you do not start copying or
) to highlight Machine Setup and then press Select (
) to highlight Day Light Saving and then press Select (
) to highlight Manual and then press Select (
) to return to the Standby mode.
) to highlight Setup and then press Select (
) to highlight Machine Setup and then press Select (
) to highlight Scan Power Save and then press Select (
) to display the time settings you want.
) to save the selection.
) to return to the Standby mode.
).
).
).
Page 26 of 52
).
).
).
).
).