Table of Contents
Advertisement
To enter the TCP/IP setting from your printer's operator panel, take the following steps:
1.
Press Scroll (
2.
Press Scroll (
3.
Press Scroll (
).
If you selected TCP/IP (IPv4) .
a.
Press Scroll (
b.
Press Scroll (
If you selected TCP/IP (IPv6) .
a.
Press Scroll (
b.
Press Scroll (
d.
Press Cancel (
Static Addressing
To enter the TCP/IP address from your printer's operator panel, take the following steps:
1.
Press Scroll (
2.
Press Scroll (
3.
Press Scroll (
4.
Press Scroll (
5.
The first available menu item, Manual , appears and then press Select (
6.
The first available menu item, Set IP Address displays.
7.
Press Select (
8.
Downloaded from ManualsPrinter.com Manuals
or
) to highlight Setup and then press Select (
or
) to highlight Network Setup and then press Select (
or
) to select the network protocol you want to use and then press Select (
or
) to select IPv4 Activate and then press Select (
or
) to change the setting to On (enable) or Off (disable).
or
) to select IPv6 Activate and then press Select (
or
) to change the setting to On (enable) or Off (disable).
) to return to the Standby mode.
or
) to highlight Setup and then press Select (
or
) to highlight Network Setup and then press Select (
or
) to highlight TCP/IP (IPv4) and then press Select (
or
) to highlight Set IP Address and then press Select (
) to access the IP Address menu.
).
).
).
).
).
).
).
).
).
Advertisement
Table of Contents
Troubleshooting
