Common Windows Problems - Dell 2335dn User Manual

Condition
d_LDAP_MAX_QUERY_EXCEEDED
d_LDAP_SVR_AUTH_FAIL
d_LDAP_QUERY_FAILED
d_LDAP_NO_SUCH_ATTRIBUTE
d_LDAP_ADDR_NOT_FOUND
d_LDAP_SVR_NOT_FOUND
d_LDAP_TIMELIMIT_EXCEEDED

Common Windows Problems

Downloaded from ManualsPrinter.com Manuals
Suggested solutions
There exists limitation for number of
results from the LDAP server for each LDAP
query.
The range for the number of results is
0~100.
Set the query between 1 and 100.
If a device has invalid credential (ID or
PW), LDAP server will return authentication
failure message.
If a user presses the STOP key during the
search and no data was returned before
cancelling, the device will display this message.
Result is depending on the query from the
device.
If a user sees this error message,
changing the query can avoid this situation.
This case is happening only when
connection was successful and search result was
nothing.
It could be a wrong IP address setup or
Server is not working correctly.
Administrator can suspect the physical
condition, device (client) configuration and
server status.
In case of device configuration,
administrator should check IP address or
hostname or port number.
It only happens when server is returning
error code=8 which means "Server Time-out".
When server couldn't return all search
result within the timeout.
This is abnormal case which is depending
on the server side condition though.
A user can test server operation with other
queries.