Setting The Paper Size - Dell 2335dn User Manual

5.
NOTE:
CAUTION: Ensure that to open the rear door when you print on transparencies. If not, they
may tear while exiting the machine.
6. After printing, fold away the paper support extension and close the MPF.
Tips on using the MPF
Load only one size of print material at a time in the MPF.
To prevent paper jams, do not add paper when there is still paper in the MPF. This also applies to other
types of print materials.
Print materials should be loaded face up with the top edge going into the MPF first and be placed in the
center of the tray.
Always load only the print materials specified in
quality problems.
Flatten any curl on postcards, envelopes, and labels before loading them into the MPF.
When you print on 3 by 5 in. (76 by 127 mm) sized media on the MPF, open the rear door for a
straight paper path to avoid paper jams.
Ensure that to open the rear door when you print on transparencies. If not, they may tear while exiting
the machine.

Setting the Paper Size

After loading paper in the paper tray, you need to set the paper size using the operator panel buttons. This
setting will apply to Fax and Copy modes. For Computer printing, you need to select the paper type in the
application program you use.
1. Press Scroll (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Scroll (
6. Press Cancel (
Downloaded from ManualsPrinter.com Manuals
The settings made from the printer driver override the settings on the operator panel.
or ) to highlight Setup and then press Select (
or ) to highlight Paper Setup and then press Select (
or ) to select the paper tray you want to use and then press Select (
or ) to highlight Paper Size and then press Select (
or ) to find the paper size you are using and then press Select (
) to return to the Standby mode.
"Print Media Guidelines" to avoid paper jams and print
).
).
).
).
).