Daylight Saving; Configuring Snmp - HP R110 Configuration And Administration Manual

Daylight saving

Use this section to enable support for daylight saving time, if required for your location. When
you select Manually Set Time For Daylight Savings, additional fields display to enable
you to configure the starting and ending dates and times, and the DST offset.
The DST offset specifies how many minutes to move the clock forward or backward.

Configuring SNMP

The Simple Network Management Protocol (SNMP) enables the remote management of the HP
R1 10/R120 router by a computer that has SNMP management software installed. The HP
R1 10/R120 provides a robust SNMP v1/v2c implementation supporting both industry-standard
MIB II objects and HP-specific MIB objects. Read-only and read-write access are supported.
Select System > SNMP to open the SNMP configuration page.
To configure SNMP, set the following options:
•
Enable SNMP: Use this checkbox to enable/disable the SNMP agent. By default, the
SNMP agent is disabled. When the agent is disabled, the HP R1 10/R120 does not
respond to SNMP requests.
•
Read Community: The password that controls read-only access to SNMP information on
the router. A network management program must supply this name when attempting to get
SNMP information from the router. By default, the name is set to public. (Do not use
characters ` " & ' # \)
•
Write Community: The password that controls read/write access to SNMP information
on the router. A network management program must supply this name when attempting to
28 Managing the HP R110/R120 system