Traffic Mapping - HP R110 Configuration And Administration Manual

Traffic mapping

Up to 16 rules can be defined to classify traffic into DiffServ forwarding groups and outgoing
connections. These rules can be mapped to the WAN port forwarding queues, for which the
bandwidth can be configured on the Traffic Shaping page.
This page includes the following settings:
Rule Name
A name to identify the traffic mapping rule. (Do not use characters ` " & ' # \)
Source Address
Select Any, or a specific LAN host MAC address or IP subnet.
Destination Address
Select Any or a specific IP subnet as the traffic destination.
Popular Services
Select a popular service from the list to automatically configure the traffic type and IP protocol.
Traffic Type
Specifies UDP, TCP, or other IP protocol.
•
IP Protocol: Specifies the protocol type number when an application is not included in
the popular services list.
802.1p Priority
Identifies traffic by the 802.1p priority tag value.
DSCP/TOS
Identifies traffic by the IP DSCP or TOS value.
Traffic mapping 115