Ipv6 Dynamic Route Settings; Ipv6 Static Route Settings - HP R110 Configuration And Administration Manual

Interface
The VLAN interface used to route data to the network specified by the destination network
address.
Metric
A number used to indicate the cost of a route so that the best route, among potentially multiple
routes to the same destination, can be selected.

IPv6 Dynamic route settings

The router supports RIP next generation (RIPng) over IPv6. Like IPv4 RIP version2, RIPng uses the
same distance-vector algorithm and hop-count metric, as well as the 30 second update timer.
However, RIPng uses a different message format, a different UDP port number, and has no limit
on the message size. Also, RIPng does not include an authentication mechanism, it relies on the
security built into IPv6 (IPsec). The default setting is Disabled.

IPv6 Static route settings

The router supports an IPv6 static route function. A maximum of 15 rules can be defined.
This page includes the following settings:
Enable
Enables IPv6 static routes on the router.
Destination
Enter the IPv6 address of the destination host or network to which the route leads.
86 Routing configuration