HP R110 Configuration And Administration Manual page 13

DHCP IP Address
A dynamic connection type is the most common method used with cable modems. In many
cases, setting the connection type to dynamic is enough to complete the connection to your ISP.
Some dynamic connection types may require a Host Name. Enter the Host Name in the space
provided if you were assigned one by your ISP (do not use characters ` " & ' # \). Some
dynamic connections may require that you clone the MAC address of the PC that was originally
connected to the modem. To do so, click WAN on the main menu and then MAC Clone to set
the WAN MAC address.
Static IP Address
The Static IP addresses mode sets the router to operate with a fixed IP address to connect to the
Internet. If your ISP uses static IP addressing, you need an IP address, subnet mask, and ISP
gateway address. This information is available from your ISP or on the paperwork that your ISP
left with you. Enter your information in the provided spaces, and then click Next.
Wizard Setup 13