Advanced Wireless Settings - HP R110 Configuration And Administration Manual

Advanced wireless settings

The Advanced wireless settings page includes additional parameters concerning the wireless
network.
This page includes the following settings:
Beacon Interval
The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet
broadcast by the router to synchronize the wireless network.
DTIM Interval
The DTIM Interval indicates the interval of the Delivery Traffic Indication Message (DTIM). A
DTIM field is a countdown field informing clients of the next window for listening to broadcast
and multicast messages. When the router has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the
beacons and awaken to receive the broadcast and multicast messages. The DTIM value is
decremented every time a beacon is sent at the beacon interval.
RTS Threshold
Sets the packet size threshold at which a Request to Send (RTS) signal must be sent to a
receiving station prior to the sending station starting communications. The router sends RTS
frames to a receiving station to negotiate the sending of a data frame. After receiving an RTS
frame, the station sends a CTS (clear to send) frame to notify the sending station that it can start
sending data.
If the RTS threshold is set to 256, the router always sends RTS signals. If set to 2347, the router
never sends RTS signals. If set to any other value, and the packet size equals or exceeds the RTS
threshold, the RTS/CTS (Request to Send / Clear to Send) mechanism will be enabled. The
stations contending for the wireless medium may not be aware of each other. The RTS/CTS
mechanism can solve this "Hidden Node Problem."
Short Guard Interval
This setting is available only if the selected radio mode includes 802.1 1n.
64 Wireless configuration