2 Using the Wizard Setup
Overview
The Wizard Setup provides an easy way to quickly configure basic settings on the R1 10/R120
and make the router operational.
Automatically running the Wizard Setup the first time you log in
The first time you log in to the management interface (see the HP R100-Series Wireless VPN
Routers Quickstart for first time login procedure), the HP end user license agreement displays.
When you accept the agreement, a page displays to enable you to select your country so that
wireless radio settings are configured appropriately. Select the country in which the router is
operating, and then click Save. The first page in the Wizard Setup appears.
Accessing the Wizard Setup after your first login
When you log in subsequent to completing or cancelling out of the Wizard Setup, the System
Status page displays by default.
See also the HP R100-Series Wireless VPN Routers Quickstart, which describes the
configuration procedure for a basic wireless network.
Wizard Setup
To start the Wizard Setup, select Home > Wizard Setup, and then click Start:
Step 1: Specify system time settings
The router keeps time by connecting to a Network Time Protocol (NTP) server. This enables the
router to synchronize the system clock to the global Internet. The synchronized clock in the router
is used to record the system log and control client filtering. Select the time zone that you reside
in. The system clock may not update immediately. The router updates the current time after it
has made contact with time servers on the Internet and received a response. Alternatively, the
system clock can be entered manually or imported from the host computer (copies the system
time from the management computer).