HP R110 Configuration And Administration Manual page 75

This page includes the following settings:
VPN Tunnel Parameters
•
Tunnel Type: Select IPSec as the tunnel type.
•
Tunnel Name: Enter a descriptive text name for the tunnel. (Do not use characters ` " & '
# \)
•
Remote VPN Gateway: Enter the IP address or host name of the remote VPN server, or
select ANY if there is no specific server.
•
IP Address / Host Name: The IP address or host name of the remote VPN server.
Remote Secure Group
•
Remote Party ID: Select either ID_IPV4_ADDR, ID_FQDN, or ID_USER_FQDN.
This information must be entered identically on the IPSec software installed on the client's
machine.
If ID_IPV4_ADDR is selected, enter the IPv4 address and subnet mask in the Remote
Network Address, and Remote Subnet Mask fields. The remote network address is
usually the network address of the LAN connected to the remote server.
VPN settings 75