HP R110 Configuration And Administration Manual page 107

fields. Therefore, the same IPv6 address could be written instead as
2001:adca::123a:4567.
•
Subnet Prefix Length: The length of the IPv6 address prefix. For unicast addresses, the
prefix is typically the first 64 bits, with the following 64 bits being the host identifier.
•
IPv6 Gateway: The IPv6 address of the default next hop router to use when no routing
information is known about an IPv6 address.
DNS Settings
Configures IPv6 DNS settings:
•
Obtain IPv6 DNS servers automatically: Sets the IPv6 addresses for primary and
secondary DNS servers automatically. (Not selectable for a static IPv6 address.)
•
Use the following IPv6 DNS servers: Enter the primary and secondary DNS server
IPv6 addresses.
VLAN (Default) Settings
Sets the IPv6 settings for the local VLAN.
•
IPv6 Address: The IPv6 address of the router for the local LAN.
•
Subnet Prefix Length: The prefix length of the IPv6 address.
•
Auto Configuration: Select Stateless (RADVD) or Stateful (DHCPv6).
•
Disable: Disables the automatic assignment of IPv6 addresses to local hosts.
•
Stateless (RADVD): Enables the automatic assignment of IPv6 addresses by hosts on
the local network. The network portion of the address is based on prefixes received in
IPv6 router advertisement messages, and the host portion is automatically generated
using the modified EUI-64 form of the client identifier (that is, the client MAC address).
•
Stateful (DHCPv6): Enables DHCPv6 automatic assignment of IPv6 addresses to
local hosts based on a defined address pool. Enter the start and end of the address
range to define the pool.
•
Lifetime: The time that the IPv6 address assignment is valid.
IPv6 settings 107