Dhcp Client List; Vlan Settings - HP R110 Configuration And Administration Manual

DHCP client list

The DHCP Clients List displays the IP address, host name, MAC address, and client type of
each client that has requested an IP address since the last reboot of the router.
Only clients that have requested an IP address since the router's last reboot and fixed
associations are displayed in this list. Click Manual Assignment to reserve the dynamically
assigned IP address for a specific computer. A maximum of 32 static-lease rules can be
defined.

VLAN settings

VLANs on the router are organized and controlled by VLAN profiles. Up to four VLAN profiles
can be created. After a new VLAN profile is created, LAN or WLAN interfaces must be added
to the VLAN by changing the VLAN settings of the interfaces. An interface can be a member of
only one VLAN, either tagged or untagged. Add an interface as a VLAN tagged port if any
connected network devices support VLANs, otherwise add the port as untagged. To prevent the
forwarding of traffic between VLANs for security, select Block routing between VLANs.
Note that the default VLAN profile is read only and cannot be deleted. To create a new VLAN
profile, click Add. To modify or delete a VLAN profile, click the edit or delete icons in the
Action column of each VLAN profile entry. Note that there is no delete icon for the default
VLAN profile because the default VLAN cannot be deleted.
DHCP client list 47