HP R110 Configuration And Administration Manual page 19

•
Key Type:
Hexadecimal (characters 0-9, a-f, and A-F)
ASCII (characters 0-9, a-z, and A-Z)
•
Key 1-4 String: Enter encryption keys
Hexadecimal: Enter keys as 10 hexadecimal characters (0-9 and A-F) for 64 bit
keys, or 26 hexadecimal characters for 128 bit keys.
ASCII: Enter keys as 5 alphanumeric characters for 64 bit keys, or 13 alphanumeric
characters for 128 bit keys.
•
Default Key: You can enter up to four keys (Key 1 to Key 4). Select the key number
from the list that is used to transmit data.
•
Re-Key Interval: When using 802.1X dynamic WEP keys, enter the interval at which
the router refreshes the keys for each associated client. Specify a value in the range of
60 to 86400 seconds.
•
WPA/WPA2 Pre-Shared Key: The router uses the pre-shared key (PSK) you specify to
generate the WPA (TKIP) or WPA2 (AES) keys that are used for data encryption. Each client
that connects to the network must use the same pre-shared key.
•
Key Type:
•
Hexadecimal (characters 0-9, a-f, and A-F)
•
ASCII (alphanumeric characters 0-9, a-z, and A-Z, plus spaces and symbols)
•
Passphrase: Enter the key according to the type selected; in ASCII passphrase style
(8-63 alphanumeric characters), or in exactly 64 hexadecimal characters. For an ASCII
key, it is recommended that the key be at least 20 characters long, and be a mix of
letters and numbers. The passphrase key cannot begin or end with spaces.
•
RADIUS Settings: When using WPA2, WPA/WPA2 Enterprise, or WEP with 802.1X,
the RADIUS server details must be configured.
•
Group Key Interval: Enter the interval at which the broadcast (group) key is
refreshed for clients associated with the router. Specify a value of 0 to disable
refreshing of broadcast keys.
•
Session Key Interval: Enter the interval at which the router refreshes session
(unicast) keys for each associated client. Specify a value of 0 to disable refreshing of
unicast keys.
•
Primary RADIUS Server: Enter the IPv4 address for the primary RADIUS server that
the router uses by default, for example 192.168.1.23.
•
RADIUS Key: The RADIUS key is the shared secret key for the RADIUS server. You
can use up to 64 alphanumeric and special characters (do not use characters ` " & ' #
\). Do not use blank spaces in the key. The key is case-sensitive, and you must
configure the same key on the router and on the RADIUS server.
Wizard Setup 19