Using The Wizard Setup; Overview; Automatically Running The Wizard Setup The First Time You Log; Accessing The Wizard Setup After Your First Login - HP PS110 Configuration And Administration Manual

2 Using the Wizard Setup

Overview

The Wizard Setup provides an easy way to quickly configure basic settings on the PS1 10 and
make the router operational.
Automatically running the Wizard Setup the first time you log in
The first time you log in to the management interface (see the HP PS1 10 Wireless VPN Router
Quickstart for first time login procedure), the HP end user license agreement displays. When
you accept the agreement, a page displays to enable you to select your country so that wireless
radio settings are configured appropriately. Select the country in which the router is operating,
and then click Save. The first page in the Wizard Setup appears.

Accessing the Wizard Setup after your first login

When you log in subsequent to completing or cancelling out of the Wizard Setup, the System
Status page displays by default.
See also the HP PS1 10 Wireless VPN Router Quickstart, which describes the configuration
procedure for a basic wireless network.

Wizard Setup

To start the Wizard Setup, select Home > Wizard Setup, and then click Start.

Step 1: Specify system time settings

The router keeps time by connecting to a Network Time Protocol (NTP) server. This enables the
router to synchronize the system clock to the global Internet. The synchronized clock in the router
is used to record the system log, filtering features, and scheduling rules. Select the proper time
zone for your location. The system clock might not update immediately. The router updates the
current time after it has made contact with time servers on the Internet and has received a
response. Alternatively, the system time can be entered manually or imported from the host
computer (copies the system time from the management computer).