General Tightening Torque Specifications; Tightening Torques - Yamaha 2012 TMAX XP500A Service Manual

EAS20320

TIGHTENING TORQUES

EAS20331
GENERAL TIGHTENING TORQUE SPECIFI-
CATIONS
This chart specifies tightening torques for stan-
dard fasteners with a standard ISO thread
pitch. Tightening torque specifications for spe-
cial components or assemblies are provided
for each chapter of this manual. To avoid
warpage, tighten multi-fastener assemblies in
a crisscross pattern and progressive stages
until the specified tightening torque is reached.
Unless otherwise specified, tightening torque
specifications require clean, dry threads. Com-
ponents should be at room temperature.
A. Distance between flats
B. Outside thread diameter
A (nut) B (bolt)
10 mm 6 mm
12 mm 8 mm
14 mm 10 mm
17 mm 12 mm
19 mm 14 mm
22 mm 16 mm
General tightening
torques
Nm m·kgf ft·lbf
6 0.6 4.3
15 1.5 11
30 3.0 22
55 5.5 40
85 8.5 61
130 13.0 94
TIGHTENING TORQUES
2-14