Checking The Rear Brake Lock Caliper; Assembling The Rear Brake Lock Caliper - Yamaha 2012 TMAX XP500A Service Manual

EAS59C1402
REMOVING THE REAR BRAKE LOCK CALI-
PER
1. Remove:
• Rear brake lock cable adjusting nut "1"
• Pin "2"
• Rear brake lock spring "3"
• Rear brake lock caliper bolts "4"
• Rear brake lock caliper "5"
EAS59C1404
CHECKING THE REAR BRAKE LOCK CALI-
PER
1. Check:
• Rear brake lock caliper arm "1"
• Rear brake lock caliper bracket "2"
• Sleeve "3"
• Rear brake lock caliper "4"
• Locknut "5"
• Shaft L "6"
• Piston adjusting bolt "7"
• Boots "8"
Cracks/damage → Replace.
EAS59C1405
ASSEMBLING THE REAR BRAKE LOCK
CALIPER
1. Install:
• Slide pin bolt "1"
(to the rear brake lock caliper bracket)
Slide pin bolt
17 Nm (1.7 m·kgf, 12 ft·lbf)
Recommended lubricant
Silicone grease
2. Install:
• Rear brake lock caliper bracket
Rear brake lock caliper bracket
bolt
22 Nm (2.2 m·kgf, 16 ft·lbf)
LOCTITE®
3. Install:
• Boots "1"
• Sleeve "2"
Recommended lubricant
Silicone grease
4. Install:
• Boot "1"
4-66
REAR BRAKE