Sony HAP-S1 Service Manual page 89

Pin No. Pin Name
H12 GND40
H13 VDDARM_CAP1
H14 VDDARM_IN1
H15 GND41
H16 VDDSOC_IN1
H17 VDDPU_CAP1
H18 GND42
H19 EIM_A25
H20 EIM_D21
H21 EIM_D31
H22, H23 EIM_A20, EIM_A21
H24 EIM_CS0
H25 EIM_A16
J1 HDMI_REF
J2 GND47
J3 HDMI_D1M
J4 HDMI_D1P
J5 HDMI_CLKM
J6 HDMI_CLKP
J7 NVCC_JTAG
J8 GND48
J9 VDDHIGH_IN2
J10 VDDHIGH_CAP2
J11 VDDARM23_CAP2
J12 GND44
J13 VDDARM_CAP2
J14 VDDARM_IN2
J15 GND45
J16 VDDSOC_IN2
J17 VDDPU_CAP2
J18 GND46
J19, J20 EIM_D29, EIM_D30
J21, J22 EIM_A23, EIM_A18
J23 EIM_CS1
J24 EIM_OE
J25 EIM_DA1
K1 HDMI_HPD
K2 HDMI_DDCCEC
K3 HDMI_D2M
K4 HDMI_D2P
K5 HDMI_D0M
K6 HDMI_D0P
K7 NVCC_MIPI
K8 GND53
K9 VDDARM23_IN1
K10 GND49
K11 VDDARM23_CAP3
K12 GND50
K13 VDDARM_CAP3
K14 VDDARM_IN3
K15 GND51
K16 VDDSOC_IN3
K17 VDDPU_CAP3
K18 GND52
K19 NVCC_EIM0
K20 EIM_RW
K21 EIM_EB0
K22 EIM_LBA
K23 EIM_EB1
I/O
- Ground terminal
O Internal regulator output terminal
- Power supply terminal for the cores regulator (+1.42V)
- Ground terminal
- Power supply terminal for the SOC and PU regulators (+1.42V)
O Internal regulator output terminal
- Ground terminal
I Interrupt signal input from the FPGA
I VBUS power over current detection signal input terminal for the USB connector
- Not used
I Boot mode setting terminal
O Serial data transfer clock signal output to the FPGA
I Boot mode setting terminal
- Not used
- Ground terminal
- Not used
- Not used
- Not used
- Not used
O Internal regulator output terminal
- Ground terminal
- Power supply terminal for the +2.5V regulator (+3.3V)
O Internal regulator output terminal (+2.5V)
O Internal regulator output terminal
- Ground terminal
O Internal regulator output terminal
- Power supply terminal for the cores regulator (+1.42V)
- Ground terminal
- Power supply terminal for the SOC and PU regulators (+1.42V)
O Internal regulator output terminal
- Ground terminal
- Not used
I Boot mode setting terminal
O Confi guration data output to the FPGA
- Not used
I Boot mode setting terminal
- Not used
- Not used
- Not used
- Not used
- Not used
- Not used
- Power supply terminal for the MIPI interface (+2.5V)
- Ground terminal
- Power supply terminal for the cores regulator
- Ground terminal
O Internal regulator output terminal
- Ground terminal
O Internal regulator output terminal
- Power supply terminal for the cores regulator (+1.42V)
- Ground terminal
- Power supply terminal for the SOC and PU regulators (+1.42V)
O Internal regulator output terminal
- Ground terminal
- Power supply terminal for the EMI interface (+3.3V)
I Boot mode setting terminal
I Boot mode setting terminal
I Boot mode setting terminal
I Boot mode setting terminal
Description
Fixed at "L"
Fixed at "L"
Not used
Fixed at "L"
Fixed at "L"
Not used
Not used
Fixed at "L"
Fixed at "L"
Fixed at "L"
Fixed at "L"
HAP-S1
89