5.11 Configuration Editing Commands - Datalogic Dragon D131 Reference Manual

5.11 CONFIGURATION EDITING COMMANDS

The following commands carry out their specific function and then exit the
configuration environment.
Command
Ì$+$*oÎ
Ì$+$!KÎ
Ì$+$&_Î
Ì$+RX0$-qÎ
Ì$+RX1$-vÎ
Ì$+RX2$-{Î
Restore Dragon™ reader default configuration
(see the relative Quick Reference Manual for
default settings)
Transmit the
Dragon™ M131 software release
Transmit Dragon™ reader configuration in
ASCII format.
This command is not effective with Pen
emulation interface.
Restore OM-30X0 default configuration (see the
relative Quick Reference Manual for default
settings)
Transmit the OM-30X0 Software release.
Transmit OM-30X0
format.
This command is not effective with Pen
emulation interface.
Description
Dragon™
configuration
REFERENCES
D131 or
in ASCII
163