Product Description - Buderus LOGANO PLUS GB312 Installation Instructions Manual

2

Product description

2.8 Product description
The Logano plus GB312 (  Fig. 1) is supplied with a fully factory-fitted
and ready-wired Logamatic BC10 basic programming unit
( Fig. 2, page 9).
Fig. 1 Logano plus GB312 - main components
[1] Programmer (MC10 and BC10)
[2] Gas burner
[3] Front wall of boiler
[4] Siphon
[5] Boiler block with thermal insulation
[6] Ignition Control
[7] Gas Valve
[8] Boiler casing
[9] B-kit with flow check valve
(supplied as standard, not factory installed)
[10] Gas isolating valve
(supplied as standard, not factory installed)
[11] Mating flange, 2½ "
(included in B-kit, not factory installed)
[12] Bolts, washers, Lock washers and nuts
(to mount supply manifold and mating flanges)
The main components of the Logano plus GB312 ( Fig. 1) are:
• Control Panel Assembly
• Frame and jacket
• Boiler block with thermal insulation
• Gas burner
• B-kit (standard B-kit comprising temperature/pressure gauge,
pressure relief valve, supply manifold, flow check valve, mating flange
for flow/return piping, not factory installed)
• Gas isolating valve
The programming unit monitors and controls all electrical boiler
components.
The boiler heat exchanger transfers the heat generated by the burner to
the heating water. The thermal insulation reduces radiant and standby
heat loss.
8
12
10
11
Logano plus GB312 – 6 720 647 367 (2012/11)
7 747 010 720-01.3RS