Table of Contents
Advertisement
Media Output Locations
Media Output Locations
The machine has two output locations:
•
Output tray, face down
of 20 lb (80 g/m²) paper, 10 transparencies and 10
sheets of labels.
Note:
Only one transparency or label can be fed at a
time.
•
Rear cover, face up
The machine sends output to the output tray by default. If special media such as envelopes print out
with wrinkles, curl, creases, or black bold lines, the rear cover should be used for the output. Open the
rear cover and keep it open while printing one sheet at a time.
Note:
The rear cover output can only be used for simplex jobs. Duplex printing with the rear door
open will cause paper jams.
Using the Output Tray
The output tray collects printed paper face down, in the order in which the sheets were printed. The
output tray should be used for most jobs.
To use the output tray, make sure that the rear cover is closed.
Notes:
•
If paper coming out of the output tray has problems, such as excessive curl, try printing
to the rear cover.
•
To reduce paper jams, do not open or close the rear cover while the printer is printing.
62
Xerox® Phaser® 3052/3260
User Guide
p to a maximum of 150 sheets
, u
one sheet at a time.
,
Hide quick links:
Advertisement
Table of Contents
